accidentally filled this clip with bullets facing the wrong way and now one is stuck

[xxNxIxGxGxExRxxJxIxMxx]

first lemme say that this belongs in bad ideas because of what i'm gonna do with this gun after I get it loaded right

like the topic says i was loading this clip and i accidentally loaded the bullets in facing the wrong direction no big deal right i just took them out but the last one got flipped a little wapper jawed in the clip and now i can't get it out what is a safe way to get this last bullet out is it safe to use a screwdriver and pry it out?

[Pathfinder]

Shooting your self in the head isn't a bad idea. Please move to trashcan.

[imawolfrawr]

You're horrible at trolling nigger

[Ouroboros]

Originally Posted by xxNxIxGxGxExRxxJxIxMxx

first lemme say that this belongs in bad ideas because of what i'm gonna do with this gun after I get it loaded right

like the topic says i was loading this clip and i accidentally loaded the bullets in facing the wrong direction no big deal right i just took them out but the last one got flipped a little wapper jawed in the clip and now i can't get it out what is a safe way to get this last bullet out is it safe to use a screwdriver and pry it out?

EDIT: Its stuck in the clip!!!? pry it out

[xxNxIxGxGxExRxxJxIxMxx]

look i can't admit to nothing illegal on here it says so in the rules but it is a 9mm bareta and well because of the rules it is "too far of a drive" for me to take it to a gunsmith if you get what i mean

[Ouroboros]

Originally Posted by xxNxIxGxGxExRxxJxIxMxx

look i can't admit to nothing illegal on here it says so in the rules but it is a 9mm bareta and well because of the rules it is "too far of a drive" for me to take it to a gunsmith if you get what i mean

\

I fixed it

[xxNxIxGxGxExRxxJxIxMxx]

ok so i can just use a screwdriver or anything to pry it out what if i set off the bullet in the clip should i worry about that?

[Ouroboros]

Originally Posted by xxNxIxGxGxExRxxJxIxMxx

ok so i can just use a screwdriver or anything to pry it out what if i set off the bullet in the clip should i worry about that?

You wont set it off. Theres 2 parts to the firing process. The pin hits the center of the bullets and causes a kenetic charge. The screwdriver wont do shit..

Do it on a live webcam...live snuff if it doesnt work then you wont be a total waste

[xxNxIxGxGxExRxxJxIxMxx]

ok i bent the top of the clip a little and i got the bullet out but i dont know if the clip will stay in the gun now

[Ouroboros]

Originally Posted by xxNxIxGxGxExRxxJxIxMxx

ok i bent the top of the clip a little and i got the bullet out but i dont know if the clip will stay in the gun now

ya id be carefull about that bit

[xxNxIxGxGxExRxxJxIxMxx]

aight i bent it back a little bit and its all good now it stays even when i run with it

[Pooka]

This is some of the shittiest trolling I have ever seen

[wolfmobster]

Be safe that's all I gotta say... nowadays handguns don't play that shit

[xxNxIxGxGxExRxxJxIxMxx]

its a good day boys this nigga just got paid and the gun worked fine when it needed to

[wolfmobster]

Originally Posted by xxNxIxGxGxExRxxJxIxMxx

its a good day boys this nigga just got paid and the gun worked fine when it needed to

Sounds good that everything's going good I know those feelings

[T.K. Baha]

I don't think shooting someone with the casings would kill them.

[kirbyy]

yhhahahahaahahahahah

[313]

somebody just lynch this god damn nigger and let us go back to our routine please...

[Raptor Ribs]

Pull the trigger. See what happens. Remember, the closer you hold the gun to your face, the less likely you are to be shot.

[Pooka]

SWIM says pointing the opening of the gun towards your face and pulling the trigger is the best way to check to see if its working.

[Cir]

Heat up the clip with a cigarette lighter, metal expands when its heated, will make it easier to remove. Make sure you thoroughly heat the area around the bullet.

[zuperxtreme]

It must be a pain in the ass typing your username to log in.

[Jaguarstrike]

You should just be able to mash the lead part of the bullet with a screw driver, its surprisingly soft (it will leave a mark on paper.) Once you do this it will give you more wiggle room to remove the bullet.

[brutus]

If you loaded bullets the wrong way, you shouldn't be using a gun.

[meta]

1.point the gun at face
2.pull trigger
3.????
4.Profit!

[bleh]

Originally Posted by zuperxtreme

It must be a pain in the ass typing your username to log in.

i hate typing out my username.