Making a Bulb to Smoke your Meth
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
First of all...whoever wrote the first article on making a bulb (some Dumb Ass...hey, thats what he put) doesn't know shit about making bulbs.
Things you will need: a bulb or two, pliers, hand held torch, and salt. (all of this can be purchased at wal-mart if you don't have it laying around)
First of all, take a pliers and bust off that little circular metal thing on the end of the bulb. Next, lightly stab into the bulb breaking all the shit thats inside of it. Once it is all broken, just dump it into the garbage. This next step only needs to be taken if the bulb has that white shit coated on it. Take some of your salt and dump it into the bulb and start swirling it around. I know it sounds weird but trust me, the salt acts as an abrasive and removes all that shit in no time. Once you think you have all that white shit off, just dump it all into the garbage. Finally, take your little hand held torch and light it. I have found these to work best just because they don't make much noise like the big ones, and they are easier to hide if you get pulled over. The torch will be used to make the hole. Pick a spot on the bulb, usually about 2/3 of the way to the top works fine, and put the hottest part of the flame on it. Once it starts getting hot start blowing in the hole you made with the pliers. Eventually, you will hear a pop noise and what you have done is make a perfect hole in your bulb. You don't have to sit around for a half hour filing one out like dumb ass said, the whole process can be done in a couple minutes. Finally, once that is all done, let your bulb cool off for a few minutes, then smoke that fucker!