by The Leftist
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Have you ever heard of speed?
No, not those little pills that are shaped like hearts, not black beauties, or magnum .357's, but real crystal.
This is the exact drug that Hitler used on his troops in WWII to make them fight for days on end. This is the drug, that in the 60's, caused a "smack" uproar in New York's "Needle Park".
Now, you can make this very same drug, in your own dangerous kitchen, safely and easily. Once you do this a few times, you will get the hang of it. I no longer have to read the directions to produce it.
What to do with it once you have made it:
Take a ball about the size of a lead pellet, and wrap it in tissue, and swallow, or you can put it in capsules and use it. You can smoke it, mix it with vitamin B-12, and snort it like cocaine. You can also sell it, for about
$65-70.00 a gram, and don't forget to cut it.
Remember, this is pure stuff
List of chemicals and materials
Dilute Hydrochloric acid--> This may be purchased at the hardware store. It's sold as a brick and driveway cleaner. They call it muriatic acid.
Sodium Hydroxide--> This, you probably already have. It's called "lye" at mostplaces; it's drain cleaner.
Ethyl Ether--> You'll probably have to make this. Don't worry, it's a breeze. Just go to your local K-mart or Auto parts store, and get a can of that "STARTING FLUID" it comes in a spray can. It's used for cold weather starting of gasoline engines.
"VICKS" nasal inhalers-->USE ONLY VICKS!! No other kind will work that I know of. These are at any drug store or grocery, etc. You need 12 of em, but don't buy em' by the dozen, unless its winter time, then you can just say yer from some nursing home, and you're stockin up for the patients. Otherwise buyem' 2 at a time, if possible. Get a friend to help you. The druggists at the drug store usually will know what's goin on if you buy quantity.
LIST OF EQUIPMENT
Two large eyedroppers<br>
ten small glass bottles<br>
one large glass or porcelain bowl<br>
one small jar with a top<br>
one Pyrex baking dish<br>
one glass test tube
N O T I C E: DON'T SMOKE IN THE SAME ROOM WHEN YOU DO THIS. OPEN A WINDOW IN THE ROOM IF POSSIBLE. FOLLOW THESE INSTRUCTIONS EXACTLY. THIS RECIPE HAS BEEN TESTED AND THIS IS THE BEST WAY TO DO IT. DON'T TAKE SHORTCUTS, AND DON'T EVEN START TO DO THIS UNLESS YOU HAVE ABOUT 3 HOURS SPARE.
PREPARING ETHER! (DO THIS FIRST) Take one of the small bottles and spray starter fluid in it till it looks half-full. Then fill the rest of the way with water, cap the bottle and shake for 5 minutes. Then, draw off the top layer with the eyedropper, and throw away the water layer. Repeat this until you have about 3 oz. of ether.
Put the cap on it, and put it in the refrigerator if you can. (If you can't, don't worry about it) You'll use this in the procedure below.
THE TRIED AND TRUE HOME PRODUCTION METHOD
(1) Break open the inhalers, a pair of real sharp scissors does this good.
Place the cottons that were inside in a jar and close the lid. (Remember you use all 12 cottons.)
(2) In the bowl, combine 1- 1/3 oz. water and 2/3 oz. muriatic acid.
Shred cottons in this solution, and knead for 5 minutes with hands.
(ALWAYS BE SURE THERE'S CLEAN RUBBER GLOVES on your hands.)
Squeeze all juice out of filters after you knead, and throw em away.
(3) Filter the remaining liquid into the quart jar.
It will be necessary to do this several times to get that awful
smelling oil out. The chemicals in theinhalers have been bonded
to the HCl, and the oils have been filtered off.
Throw the filters away.
(4) Pour enough of the solution into a small bottle to fill it 1/3 full.
Save any left-over juice for the second batch.
(5) Pour 1/4 teaspoon of the lye crystals into the bottle and agitate.
Do this carefully, as the mixture will become hot, and give off a gas.
Repeat this step until the mixture remains cloudy.
(6) Fill the bottle from step (5) up the rest of the way with ether.
Cap thebottle, and agitate for about 8 minutes.
It is very important to expose every molecule of the free-base to the ether for as long as possible.
(7) Let the mixture settle. There will be a middle layer that is very thick.
Tap the side of the bottle to get this layer as thin as possible.
(8) Remove the top layer with the eyedropper, being careful not to get any ofthe middle layer in it.
Save the top layer, and throw the rest away.
(9) Fill a bottle half-way with water, and about 10 drops of acid.
Pour thetop layer from step (8) into the bottle, and cap it.
Shake the bottle for 2 minutes.
When it settles, remove the top layer and throw it away.
The freebase has now been bonded to the HCl/water mixture.
(10) If there is anything left from step (3), repeat the procedure with it.
(11) Evaporate the solution in the Pyrex dish on low heat.
You can do this onthe stove, but I have found that if you leave it on
top of a hot-water heater (like the one that supplies hot water to your house)
for about 2-3 days, the remaining crystals will be Methamphetamine.
Some notes: Police are now calling this the "New Cocaine".
It is very easy to become delirious off the ether fumes, so be sure you arewell ventilated, I mean it!!!
Small, aspirin or experiment bottles seem to work the best for smaller batches. The measurements are not exact, so you don't have to be either. In step 9, be sure you don't use too much water.
Remember, this is the water you have to use to evaporate.